This blog will focus on the nke speed and depth sensors. Good quality sensors are key to good autopilot performance, but location and water conditions are also factors in choosing the right sensors for your boat.
The marine industry has been awash with new and exciting technological innovations in recent years and, standing at the forefront are companies like nke marine electronics. nke are the standard for the majority of mini-transat and IMOCA 60 classes. They provide electronics for many different functions and for many different types of sailor. You can find out more about the full range of nke products available on our website here.
Range of Depth Sensors
The nke Depth Sounder
The nke depth sounder can provide depth values in metres or feet depending on your preference. With a range of up to 50 metres, the nke depth sounder is able to give depth either from below waterline or below the keel depending on your preference.
Speed Sensors
All nke speed sensors can measure boat speed and the temperature of the water, to varying degrees.
Paddle wheel speed sensor
The classic speed sensor, the paddle wheel, is a great choice for many types of sailors, for racing, cruising or offshore sailing. Reliable, cost effective and compact, this sensor will certainly prove more than adequate for the needs of most sailors. The biggest downside of the paddle wheel sensor is that weeds and other sea debris can occasionally get caught in the sensor's moving parts.
Ultrasonic Speed sensor
The Ultrasonic sensor ends the problem of wheel blockage because it has no moving parts. It is a great choice for racers as the sensor is installed flush, meaning no drag. The ultrasonic technology allows anti-foul paint to be applied to the sensor, leaving it clean all season and cutting down maintenance. The Ultrasonic sensor will also not need calibration as frequently as the other sensors. However, it should be noted that in murky or dirty water, the ultrasonic sensor can lose a degree of accuracy.
Electromagnetic speed sensor
The electromagnetic speed sensor is the top of the nke range and gives highly accurate data in all waters, including low visibility. It also has no moving parts and is a robust and compact device which will not create drag in the water and is unlikely to get caught on any weeds or other debris.
Which depth sensor should I choose?
There is not a great variation in performance from the three speed sensors listed above. The electromagnetic sensor and Ultrasonic sensor can measure temperatures of -10 to +50°C, whilst the paddle wheel can measure 0°C to +50°C. All three sensors can measure speeds up to 35 knots.
For cruising and casual racing, the paddle wheel speed sensor will prove to be more than sufficient for the vast majority of sailors. It’s cost effective and a great all-round speed sensor.
For professional sailors, it all depends on where you will be sailing. In waters with low visibility or high levels of sand, mud and other sediments, the electromagnetic sensor will be best suited to maintaining accurate results.
But, for the majority of competitive sailors sailing in clearer water, the ultrasonic speed sensor is accurate and reliable. It is the least vulnerable to fouling and is also generally very low maintenance and a great choice!
Log / Sounder Interface
Regardless of which depth sensors you choose, you will need this interface to connect the depth sensors and speed sensors to the topline bus. nke offers both single and dual log / sounder interface options, with the dual interface offering an additional slot for a second speed sensor. This is designed for boats such as multi-hulls or wide mono-hulls where one speed sensor would spend significant periods out of the water
Where should I position the depth sensors?
The placement of the depth sensors and speed sensors are depend on the type of boat you have.
On a sailboat, the ideal position for the sensors is in front of the keel, along the axis of the boat. The diagram below shows the proper positioning.
For motor boats:
It’s important to line the sensor axis parallel to the centre (Lubber) line of the boat to ensure accurate calculations.
The depth sensors are fitted through the hull with a through hull fitting. These usually come with the sensor, but a replacement fitting can be purchased here.
For more information on nke depth sensors and our range of marine electronics, contact us via email [email protected] or if you are interested in looking at upgrading your boat navigation electronics please use the link below:
and then Add to Home Screen.
nke Depth sensors and Speed sensors explained