Specifications for Ronstan Series 160 furler - Drum, top-down
| Recommended line - Max Ø (mm) | 10 |
| Recommended Boat size - Max (ft) | 46 |
| Jaw pin Ø (mm) | 10 |
| Jaw width (mm) | 18.7 |
| Drum Ø (mm) | 160 |
| SWL (kg) | 3000 |
| NBL (kg) | 6000 |
| A (mm) | 155.1 |
| B (mm) | 22.5 |
| C (mm) | 93.5 |
| D (mm) | 131.5 |
| E (mm) | 33.4 |
| F (mm) | 18.7 |
| G (mm) | 9.9 |
| H (mm) | 10 |
| I (mm) | 160 |
| J (mm) | 175 |
| K (mm) | 38.9 |
| L (mm) | 11 |
| Weight (g) | 964 |
|
Ronstan Generation 2 – Rotation stop
|
|
|
|
Ronstan Generation 2 – installation of furling line
|
|
|
R-RS216100_Ronstan S160 Gen 2 Top Down Furler Manual_001.pdf
Ronstan Series 160 Gen 2 Top Down Furler Manual
|
|
|
|
R-RS216100_Ronstan S160 Gen 2 Top Down Furler Drawing_001.PDF
Ronstan S160 Gen 2 Top Down Furler Technical Drawing
|
Ronstan's range of continuous line furlers puts great performance and reliability within the reach of cruising and racing sailors alike. The Ronstan Series 160 top-down furler is a dedicated top-down model designed for downwind sailing with soft luff sails in true wind angles greater than 90˚. Top-down furling provides a new level of simplicity, safety and speed for handling of asymmetric spinnakers and gennakers. Cruisers can now store, deploy and retrieve these sails as simply as they would a furling headsail from the safety and convenience of the cockpit. Racers too can benefit from the characteristics of top-down to allow superfast retrieval of code zeros by pre-winding the torsion rope and firing the sheet when ready. Advanced drum technology: Drums incorporate a sophisticated furling line groove profile and cross-hole geometry to grip the furling line securely when furling. When deploying the sail the continuous furling line self-ejects from the grip zone, remaining stationary for smoother, safer operation with minimum rope wear. A PTFE perimeter strip ensures the unloaded furling line can't fall from the drum or become snagged. Furlers and top swivels feature a factory sealed, maintenance free bearing. The continuous furling line is easily fitted and removed from the furler without tools, so it can be left on deck when the sail and furler are stowed below. Drum diameter is matched to load rating to provide the optimum balance between speed and ease of furling and the furling line guide can be adjusted to suit either 0 or 90 degree attachment as required. Both the furling drum and top swivel have retained clevis pins and the drum includes high resistance shackle RS216050 on its underside. Attachment options include snap shackle, 2:1 fairlead and torsion rope thimble. The tack of the sail can be attached to the floating collar of the drum using tack loop R-FS160-LOOP, allowing easy attachment and release of the tack from the collar - an advantage if the furler is to be left on deck. A compact rotation stop can be installed on the underside of the Series 120 furler to prevent inadvertent unfurling of the sail; locked out when in use and in when the sail is furled or stowed. Specified weight excludes shackle. Designed to work with top swivel RS216010, the Ronstan Series 160 top-down furler is rated to 6,000kg NBL and is optimised for use with 10mm furling line (not included). Ronstan continuous line furling systems require the sail to be either completely unfurled or completely furled – the furler cannot be used with a partially furled sail. N.B. Maximum Working Load (MWL) on the tack ring swivel is 1,500kg.
Specifications
| Recommended line - Max Ø (mm) | 10 |
| Recommended Boat size - Max (ft) | 46 |
| Jaw pin Ø (mm) | 10 |
| Jaw width (mm) | 18.7 |
| Drum Ø (mm) | 160 |
| SWL (kg) | 3000 |
| NBL (kg) | 6000 |
| A (mm) | 155.1 |
| B (mm) | 22.5 |
| C (mm) | 93.5 |
| D (mm) | 131.5 |
| E (mm) | 33.4 |
| F (mm) | 18.7 |
| G (mm) | 9.9 |
| H (mm) | 10 |
| I (mm) | 160 |
| J (mm) | 175 |
| K (mm) | 38.9 |
| L (mm) | 11 |
| Weight (g) | 964 |
To install this Web App in your iPhone/iPad press
and then Add to Home Screen.
