PROtect OD KIT’s are small kits suitable for dinghies or small boats. Every kit has been designed and optimized by product specialists and professional sailors to satisfy demands of top level competition. Laser OD Kit The “Laser Mast Disk” is a 1mm thick disk with a diameter of 65mm to be placed into the mast step and avoid abrasion. The “Laser Wear Kit” contains , two stripes of UHMWPE and acrylic adhesive to be placed on the mast, down to mast step and mast deck collar area to avoid any wearing and tearing. Laser Kit gathers the above two items plus a selection of six CHAFE tapes for snug fit to the top and bottom mast sections, deck abrasion from the tiller, making more slippery the outhaul and finally some squared for the centre board. PML001 - The Laser Mast Wear Kit contains two stripes of UHMWPE and acrylic adhesive (500 micron, 51mm wide, 200mm long) to be placed on the mast, between the mast step and the mast deck collar to avoid any wearing and tearing. PML002 – The Laser Mast Disk is a 1mm thick disk with a diameter of 65mm to be placed into the mast step and avoid abrasion. PML004 – The Laser Mast snug fit consists of PCT125 17mm and 30mm, 2m long which creates a snug fit of top and bottom mast sections PML007 – The Laser Squares are 5 squares of PCT250 with adhesive and liner, 30x30mm for the centre board case PML003 - The Laser Kit contains all of the above plus some tiller / outhaul strips for a complete Laser package: - 2 stripes, 500 micron, 51mm wide, 200mm long (PML001) - 2 disks, 1mm, diameter 65mm (PML002) - PCT125 17mm and 30mm, 2m long for snug fit of top and bottom sections of the mast (PML004) - PCT250 34mm, 150mm for the tiller abrasion - PCT250 150mm x 300mm for the outhaul - PCT250 5 squares 30 x 30mm for the centre board